Caution Fork Lift Truck W014 150x150mm

Photoluminescent Sign & Tape Material Specifications

Self-Adhesive Vinyl 

Flexible laminated PVC composite material incorporating a photoluminescent layer thermally welded to a white reflective layer, backed with pre-applied adhesive.

Thickness: 0.6mm

Indoor durability: in excess of 5 years

Outdoor durability: good, but can be reduced in strong sunlight and humidity 

Toxicity: non-toxic, non-radioactive and contains no phosphorous or lead

Chemical resistance: resistant to most common cleansing agents

Flammability: inherently fire retardant

Adhesive: cross-linked acrylic, pressure sensitive permanent adhesive with silicone release backing paper

Luminance performance: in excess of 46mcd/m2 @ 10min & 4mcd/m2 @ 60min., when tested in accordance with DIN 67510 part 1

Rigid PVC 

Laminated PVC sheet incorporating a photoluminescent layer backed by a rigid white reflective substrate and protected by a tough, clear gloss PVC film. All laminations are thermally welded to form a cohesive sheet.

Thickness: 1.2mm

Indoor durability: in excess of 5 years

Outdoor durability: excellent, but can be reduced in strong sunlight

Toxicity: non-toxic, non-radioactive and contains no phosphorous or lead

Chemical resistance: resistant to most common cleansing agents

Flammability: inherently fire retardant

Luminance performance: in excess of 46mcd/m2 @ 10min & 4mcd/m2 @ 60 min., when tested in accordance with DIN 67510 part 1

Non-Photoluminescent Sign & Poster Material Specifications

Self-Adhesive Vinyl 

Flexible gloss white vinyl material. 

Weight: 110g/m2

Thickness: 80 micron

Dimensional stability: 0.5mm max to DIN30646

Outdoor durability: approximately 2 years

Chemical resistance: no effect from oils, greases, aliphatic solvents, heptane and kerosene

Flammability: self extinguishing

Adhesive: emulsion based, UV resistant, permanent adhesive with high initial tack and adhesion

Gloss: 60 units at 20o in accordance with BS EN ISO 2813:1994. The determination of specula gloss of non-metallic paint films at 20o, 60o & 85o.

Rigid PVC 

Opaque rigid white gloss PVC material.

Thickness: 950 micron with UV stabilisation & impact resistance > 650kJ/m2 to BS EN ISO 8256 Plastics - Determination of tensile-impact strength

Dimensional stability: 4% to DIN 53377 @ 140oC/10 min 

Chemical resistance: no effect from oils, greases and most common solvents

Cold weather performance: -30oC tested to DIN 53372 Testing of plastic films - Determination of the thickness by mechanical feeling PVC films