IMO Signal Lifejacket Photoluminescent

€2.40
VAT excluded

IMO Signal Photoluminiscent

Variants:

  • Whith or Whithout Text
  • Vinyl thinckness 06 mm or Rigid PVC thinckness 1,2 mm

Luminescence Perfomance: Greater than  46 mcd/m2 at 10 min and 4 mcd/m2 at 60 min. In test conditions according to DIN 67510 part 1

Measure
Material
Option with or without text
Quantity

  • We strongly respect the GDPR requirements! We strongly respect the GDPR requirements!
  • Free shipment on orders over 200€! Free shipment on orders over 200€!
  • If our product doesn't  satisfy you, send it back! If our product doesn't satisfy you, send it back!

The IMO Photo-luminescent Signs are produced under rigorous quality controls (ISO 9001)  to comply with the standards established by international organizations such as Germanischer Lloyd, Bureau Veritas and Lloyd's Register.

For a maximum durability of the self-adhesive venyl signs the surface type and its condition is important. The ideal temperature for internal application is between 10 and 38 degrees Celsius.

Following the appropriate and designated conditions of assembly and cleaning, the factory warranty is 5 years.

For exterior applications, considering the exposure to variable temperatures, humidity and other extreme environments, this guarantee will not be applicable, as well as on uneven, rough and porous surfaces.

The type of surface where this product is applied, its preparation for the adhesive and future cleaning conditions can influence the durability and warranty of the product.

Specifications of photo-luminescent signl and ribbon material

Vinyl

Flexible self-adhesive laminated PVC composite material incorporating a photo-luminescent layer thermally welded to a white reflective layer, backed with pre-applied adhesive. The thickness is 0.6mm. The durability in interiors is superior to 5 years.

In outdoor environments the durability is good but it can be reduced depending on weather conditions, sunlight and excessive humidity.

Due to its composition, it is not toxic to the environment since it contains neither phosphorus nor lead. Resistant to common cleaning products.

Flame-retardant, for its use and to preserve safety on board.

The adhesive is acrylic, permanent protected with paper to extract silicone.

Luminance performance: greater than 46 mcd / m2 at 10 min and 4 mcd / m2 at 60 min, when tested in accordance with DIN 67510 part 1.

Rigid PVC

Laminated PVC that incorporates a photo-luminescent layer backed by a rigid white reflective substrate and protected by a resistant and transparent PVC film. All laminations are thermally welded to form a cohesive sheet.

The thickness is 1.2mm, and the durability in interiors is superior to 5 years.

Outdoor durability is excellent, but can be reduced depending on weather conditions, sunlight and excessive humidity.

Due to its composition, it is not toxic to the environment since it contains neither phosphorus nor lead. Resistant to common cleaning products.

Flame-retardant, for its use and to preserve safety on board.

Luminance performance: greater than 46 mcd / m2 at 10 min and 4 mcd / m2 at 60 min, when tested in accordance with DIN 67510 part 1.

814060

Specific References

ean13
5204988140603